Planning a Coworker under a person

Plan a Coworker under a person for the roles it would help, hire it from the plan, and draft a role's tasks from its job description.

For: People with the Administrator, People manager or Executive ability · Last updated

A planned role is a Coworker (or a person) you intend to add under someone in your organization. It is a plan, not a promise: it changes no one's access and grants nothing. On the Organization page it appears under its person as a card with a dashed border and the Planned label, and in the Planned lens as a dashed robot mark on the roles it would help.

Who can plan#

People with the admin, people_manager or executive ability can add, change, fill and cancel planned roles, across the whole company. Anyone else sees the plans but none of the buttons below.

What if we add a Coworker here?#

Before you plan, see what a Coworker could take on:

  1. Open a role in a unit (select its box in Units and roles). In the Role panel, under How much could AI take, select What if we add a Coworker here? In the Planned lens the same button is on each role's box.
  2. The What if panel opens beside the chart (as a panel from the right edge on tablets, and on its own page on phones). It reads the sum aloud, line by line: People in the unit, Hours each works a week, Share of work AI could take and Hours a week freed, for example "6 people x 40 hours x 30% to 45% = 72 to 108 hours a week", with the full-time equivalents of capacity under it. How this is worked out shows every step. When the role also has new work that takes time, the panel adds Gross freed, New work uses and Net. For example, in the Software Developer role (40 hours a week), Coding takes 60% of the week with a Coworker taking over 100%, and Code Review takes 20% with a Coworker taking over 60%: 28.8 hours freed per person. New work, Reviewing third-party dependencies, takes 2% of the week with a Coworker doing 90% of it: the person spends 0.8 hours, so the net is 28.0 hours. New work never counts as freed hours; the time a person spends on it is subtracted.
  3. To add more roles to the same sum, choose them in Add another role group; Remove takes one out again.

People with the executive or manage_compensation ability also see the dollars at the role's rate band: the rate, the weeks a year and the amount per year, before the cost of running the Coworker. Everyone else sees hours only.

Assumptions. The panel says which assumptions it uses: the weeks in a year (48 unless you change it) and how much of the work AI could help with counts toward the planning figure (50%). Select Change assumptions, enter new values and select Use these to see the sum worked out again; Back to the defaults returns to the usual values. Changes are for this view only and are not saved.

When a plan already exists. The panel opens with Already planned here: each planned Coworker that covers the role groups, with its Supervisor, the hours it would save and Open to see the plan. Under it, Already covered by planned Coworkers says how many hours of potential time savings are covered, and what another planned Coworker would add. If the hours are already covered, it says "Adding another would save 0 more hours, because these hours are already covered"; if part is open, it says how many more hours a week of potential time savings no plan covers. The sum below, headed What these roles hold, before any plan, is the same arithmetic, and the button reads Add another planned Coworker.

Adding a planned Coworker#

In the What if panel, select Add this as a planned Coworker (Add another planned Coworker when plans exist). The form starts with the roles from the panel and a suggested title:

  • Title and an optional Note (describe the role, not a person).
  • Supervisor (optional): the person who would supervise it. Hiring it later starts with them as its Supervisor.
  • Role groups it would work in: the roles in units it would help.
  • Work it would cover: All the work AI could take in these roles, or Only some tasks to choose the tasks it would take on.

Select Add the plan. A confirmation appears, such as "Planned Coworker added to Pod A.", with Show in Planned view, which switches the chart to the Planned lens; Dismiss closes it. The plan covers only the role groups ticked in the form: one planned from Pod A's role covers Pod A only unless you also tick Pod B. A plan that covers all the work covers all of the role group's hours a week, whatever the number of people in it.

What a planned Coworker covers#

The Planned lens shows how much of each role group's Potential hours your planned Coworkers cover (Savings covered) and how much is still open (Not yet covered). These are potential time savings that plans would deliver, not realized savings. A plan covers today's work only, never new work; where a role has new work, the time it uses is subtracted once from each role group's covered hours. Two planned Coworkers that cover the same work are never counted twice: a role group's covered hours never go above its Potential, and the overlap is shown. In Reporting lines the Planned lens puts a dark card above the chart with the hours of potential time savings covered by planned Coworkers and the hours not yet covered by a planned Coworker, each planned Coworker's dashed tile says what it would save (for example would save 30 to 54 h a week), and every person's card adds Planned savings: with the total for their whole branch, left out when it is zero.

Opening, changing and cancelling a plan#

Select a plan to open it: its dashed card in Reporting lines (or Open the plan on it), its robot mark in the Planned lens, or its row in Planned roles. The plan shows its role groups, its Supervisor, the work it covers and the hours it would free. From there:

  • Edit changes the title, note, Supervisor, role groups and work covered.
  • Cancel the plan takes it off the chart after you confirm; its hours stop counting as covered.
  • Hire this starts hiring the Coworker (see below).

Link an existing Coworker to role groups, at the top of Planned roles, records which role groups a Coworker you already have works in. That adds a plan already filled by that Coworker, so its hours count in those units.

Hiring a Coworker for a planned role#

Hire this opens the Hire page for that plan, with the plan's Supervisor already chosen when they may supervise Coworkers. The Hire page says you are hiring for a planned Coworker. When the hire is done, the plan and the Coworker are linked:

  • The planned role is marked filled by the new Coworker as part of the hire. If the hire does not complete, the planned role stays open.
  • If you do not name a Supervisor, the planned role's Supervisor becomes the Coworker's Supervisor, as long as they hold the manage_coworkers ability and still have access. Otherwise the usual rule applies: you become the Supervisor.
  • A Supervisor you name yourself always wins.

Hire this appears to people who hold the manage_coworkers ability (to hire) and the admin, people_manager or executive ability (to fill a plan), and only on an open plan for a Coworker: a plan for a person, or one already filled or cancelled, has no Hire this.

Drafting a role's tasks from its job description#

In the Role panel, under Tasks this role does today, select Draft tasks from the job description. The role's job description is filled in; change it or paste another (describe the role, not a person), then select Draft tasks.

Drafting can take a minute or more with a slow model. While it works the page says "Drafting tasks. This can take a minute."; Cancel drafting stops it.

The draft is a list of proposals, and nothing is saved until you add them. Each proposed task is ticked and comes with:

  • Coworker takes over, the model's estimate of how much of that task a company could realistically hand to a Coworker within a year, working with a person reviewing its work, in steps of 5. It reflects today's tools and normal oversight, so work that needs judgment, accountability or being there comes out low. You can change every number. The group follows the percent: Eliminate at 100, Redesign at 1 to 99, Retain at 0;
  • Share of the week today, on the same row as the takeover percent: the model's estimate of how much of a typical person's week in the role the task takes before a Coworker (the Edit task box words it as "How much of the role's week this task takes today, before a Coworker (optional)"), using any hints in the description (such as "a few meetings a week"). You can change or clear it. Under the list, a line adds the shares up and says when they are over 100% (they are scaled to fit) or leave part of the week undescribed; a task with no share fills what is left;
  • its kind, Work that happens today or New work AI makes possible (Create), for new work the description names; new work has no week share here, and you can set it after it is added;
  • a short reason, in plain words.

Describe the task, not a person. Untick the tasks you don't want, change a number where it is wrong, and select Add selected tasks. Draft again asks for a fresh draft from the same description and replaces the proposals; nothing is saved by drafting. The tasks are added to the role like any task you add yourself. See Units, roles and role groups for how tasks set a role's figures.

Drafting needs the admin, people_manager or executive ability. The text must be a real job description: a title alone or a few words is not enough, and you are asked for the role's responsibilities instead. You can always add the tasks yourself with Add a task.