Hiring a Coworker
Create a Coworker with the hiring wizard, or with a name and one sentence, depending on how your company has set up creation.
A Coworker can be created in one of three ways, depending on the creation setting an admin has chosen for your company (see Coworker creation setting). Everyone in the company creates Coworkers the same way at any one time.
| Setting | What you do | What happens |
|---|---|---|
| Minimal | Give a name and one sentence about what the Coworker should do. | The Coworker is created in the Interview phase and you can chat with it right away. |
| Guided | Complete the four-step hiring wizard. | The Coworker is created in the Interview phase. |
| Strict | Complete the same four-step wizard. | The Coworker is submitted as a proposal and waits for approval before it can be used. |
You need the manage_coworkers ability. Without it, the page tells you
that hiring requires the Manage Coworkers ability and to ask your administrator to grant it.
To start, open Coworkers and select Hire a Coworker.
Hiring for a planned Coworker#
On the Organization page, a planned Coworker has a
Hire this button. It opens this page for that plan: the page says you are hiring for a
planned Coworker, and the plan's Supervisor is already chosen when they may supervise Coworkers.
Hire as usual. When the Coworker is created, the plan shows as filled by it; if the hire does not
complete, the plan stays open. Hire this appears to people who hold manage_coworkers and
may plan on the Organization page (admin, people_manager or executive).
Creating with a name and one sentence#
When your company uses Minimal, the page is headed Create a Coworker, with the line "A name and one sentence." above the two fields.
- Enter the Name. Use a colleague's name, never a product name.
- Under What should it do?, write one sentence, for example "Draft first-pass replies to vendor billing questions".
- Select Create Coworker.
You become the Coworker's Supervisor and it uses your company's default model. You land on the Coworker's details page, where the Next steps card has a Start a chat button. Your sentence becomes the Coworker's instructions. If your company has no default model, creation stops with a message asking you to choose a model or ask an admin to set a default.
The job description, performance expectations and Knowledge Bases can all be added later from the Coworker's details page. See Coworker details.
The hiring wizard#
Under Guided and Strict, the wizard asks only for what your company's hiring policy requires, plus a name. It has four steps, shown as a progress bar: Start from a job description, Supervisor and goal, Name and model and Review and hire. On a narrow screen the bar shows "Step 2 of 4" and the step's name. Use Back to return to an earlier step and Continue to move on; both sit together at the bottom right.
If a step is incomplete, Continue shows what is missing under the field concerned and moves you to it.
Your progress is kept in your browser tab. If you refresh, the wizard shows "Resumed where you left off." Select Discard and start fresh to clear it.
Everything else about the Coworker (Knowledge Domain, Knowledge Bases, 90 and 365-day goals, Team, profile image and so on) is filled in on its details page after you hire it. See After you hire.
Step 1: Start from a job description#
- Paste the full job description into the box. It can be your own, or the role the Coworker will scale.
- Select Continue. The description is analyzed task by task, to separate work that is structurally human from work a Coworker can own.
Prefer to build the list yourself? Select Enter tasks manually instead.
If the analysis takes too long or cannot be completed, a message tells you so ("The analysis took too long to finish." or "The analysis couldn't be completed.") and suggests you try again or enter the tasks manually.
You then see the Task roster (headed Irreducibility Test after an analysis). Three labels are explained at the top, each with a short definition:
- Eliminate: the person stops doing it. The Coworker does it, and a person checks only exceptions.
- Redesign: the Coworker drafts or analyzes. The person directs and approves.
- Create: new work that exists because of the Coworker, such as reviews and keeping knowledge current.
Below are two columns:
- Tasks the Coworker can own become the Coworker's Primary Responsibilities, the work it fully owns.
- Tasks that stay with a person become its Scope Boundaries, its "does not do" list. This column starts with "Review and approve the Coworker's output".
Each task shows a label. For tasks the Coworker owns, use the Change label drop-down to choose Eliminate, Redesign or Create. You decide the final split:
- Drag a task by its handle to reorder it or to move it to the other column. This works with a mouse, with a finger on a touch screen, and from the keyboard: focus the handle, then use the Up and Down arrow keys to reorder and the Left and Right arrow keys to move between columns. A spoken announcement confirms each move.
- Select the pencil to edit a task's wording, or the trash can to delete it.
- Use Add another responsibility or Add more protected work and Add to add tasks the analysis missed.
Start over clears the list and returns to the pasted description.
To continue you need at least one task in each column.
Step 2: Supervisor and goal#
This step asks for the two things your policy requires:
- Supervisor. Choose the named human who is accountable for the Coworker. The list
shows people who hold the
manage_coworkersability, each as a name followed by the title when they have one, and starts with you if you are one of them. A named Supervisor is required. - First 30 days. Write what the Coworker should achieve, and by when, for example "Drafts 8 of 10 renewal summaries with no factual errors". The 30-day goal is required.
When the analysis drafted the 30-day goal, it is marked "suggested from the JD — edit freely". The Primary Responsibilities and Scope Boundaries come from the task roster in step 1.
Step 3: Name and model#
- Name. Required, and it must be unique in your company. Use a colleague's name rather than a product name. If another Coworker already has the name, hiring is refused with a message saying so.
- Role title and Practice area. Both are optional.
- Model. Your company's default model is used, so no model choice appears. A model picker appears when your company has no default model, or when the default model's context window is too small for reliable Coworker conversations. Choose the model the Coworker runs on. You can change it later from its details page without losing the Coworker.
If a model's context window is too small for reliable Coworker conversations, you see a message saying so and cannot continue with that model. If a model's context window cannot be confirmed, you see a warning that it may not support long conversations.
Step 4: Review and hire#
The last step summarizes the hire: the Coworker's name, role and practice, its Supervisor, its Primary Responsibilities, its Scope Boundaries, and its 30-day expectation.
Under Guided, select Create in Interview phase. The Coworker is created in the Interview phase, where only its Supervisor can see it, and you land on its details page.
Under Strict, the summary says the Coworker is submitted as a proposal, and the button reads Submit for approval. A page then tells you the Coworker is waiting for approval, with View the Coworker's name and Back to Coworkers. It cannot be chatted with until an admin or executive approves it. If you are an admin you can approve it yourself; if you are an executive, another admin or executive has to. Meanwhile its Supervisor can keep editing its details. See Proposed Coworkers.
After you hire#
Under Minimal and Guided, you land on the new Coworker's details page. While the Coworker is in the Interview phase, its Supervisor sees a Next steps card above the job description. It says the Coworker is in the Interview phase and to try it in Chat before you offer the internship, with a Start a chat button. Below that is a checklist, each item with a button that takes you to the place to finish it:
- Add a profile image.
- Describe its Knowledge Domain and attach Knowledge Bases, with a New Knowledge Base button to create one and attach it in one step. If you cannot manage Knowledge Bases, or the Knowledge Bases switch is off, the item reads "Describe its Knowledge Domain".
- Add 90 and 365-day goals.
- Review the model binding.
- Review its instructions.
- Add conversation starters.
- Connect tools, when the page offers connectors to you.
Items you have finished show a check. Select Dismiss to hide the card; it hides itself once every item is done. See Coworker details for each editor.
Next, see Advancing a Coworker and retiring it for how the Coworker moves from Interview to Full-time.